Out to Play

Just a couple pics of the Deadbolt as of recently.

Chica and Chavez get a ride!

So I got tired of the molded in driver on the deadbolt so...

I cut him out and replaced him with a 6 inch figure.
I added one to the passenger seat too. I got them both at a local $5 and under store.
They are some of those wrestling figures. They fit perfect.

Chavez and Chica (at least that's the names they use now!) have themselves a nice off-roader to take them on all sorts of adventures. You see, Chavez and Chica are in the import/export transportation business. They move "Items" through less conventional methods usually avoiding customs, inspections, bills of lading and other such "Official Channels". This new vehicle will certainly be handy.

After I cut the original driver out I cut a small piece of lexan I had laying around and painted it black to fill in the hole left by the original driver. The steering wheel was one of the extra pieces that came with the Deadbolt.

1:10 Roof Luggage Rack with LED Light Bar

Found  this up the other day on Amazon.
It's not intended for the Deadbolt but it works and looks great. I removed the original lightbar from the Deadbolt and tossed it aside. I couldn't use the supplied nuts to mount it because there is no roof to mount it on! Instead I used some black zip-ties and strapped it to the cage in a few locations.
It seems to be very solid. I've already rolled the truck over several times (one serious tumble, tumble, roll, bounce) and it's not bent or anything. I really like it.

1:10  Roof Luggage Rack with LED Light Bar 

One thing I'm going to do is disassemble it and paint the inside of the light buckets with a shiny silver. I want to also figure out a way to black out the back of the lights buckets. The LED's shine out the back just a little and I don't like it, it's not very scale looking like that. Check it out on Amazon

Yeah Racing Dual Motor Steel Cable Winch #YA-0511BK Review

Picked this up the other day, it's the Yeah Racing Dual Motor Steel Cable Winch #YA-0511BK

Very cool and really fast. This model came with a pre-wired DPTT (Double pole triple throw) switch that allows you to manually control the winch without a 3rd channel. Flip the switch one way and it rolls out, put the switch in the middle position and it stops, flip it the other way and it rolls in.

With 2 motors it's fast and strong.

When I first hooked it all up it didn't want to work.
Turns out I had to reverse one of the sets of wires from the motors. The two motors were turning against each other.
Once I flipped that around it was working great!
I guess they just tossed two pre-wired motors onto it and didn't think about the fact that one needs to go the other direction!

I wish these people would think about how you're supposed to bolt this thing on though. The 4 bolt slots (at least they are slots so you have some work around room) are all under the motors. First I removed the mounting plate from the winch and used it to mark and drill the holes to mount it (the stock Poison Spyder bumper is not setup for a winch). Then I re-attached the mounting plate to the winch (and used Loctite). Then I had to use a pair of Hemostats to hold the nuts in place while I worked the bolts up thru the bumper (they do supply all the necessary mounting hardware) . It was a bear and there was much cursing going on for sure but I finally got them all on (again, with Loctite).

 Yeah Racing Dual Motor Steel Cable Winch #YA-0511BK

I mounted the control switch in the passenger side of the drivers compartment. I was going to mount it on the bumper but I was afraid that the switch might get caught up on a branch or something and accidentally get turned on. I didn't want it trying to spool in and burn up the motors.